Installing new LED backup lights are actually very easy. While this guide demonstrates it on a BMW F10 M5, you can use this as a guide to install any other LED reverse light since the concept is the same.
Procedura
Passo 1
- Gain access to the back of the trunk
- Remove some clips that hold the trunk liner in place.
- Tip: You don’t have to remove all the clips, just enough so you have enough access.
Passo 2
- Pull out the bulb tray.
- Press the two clips on the side to release.
Passo 3
- Remove the bulb and swap it out with the new LED bulb.
Passo 4
- Test to see if the LED reverse lights work and enjoy.
Fonte: iFixit – CC BY-NC-SA