LED roof cab lights are quite a customizable universal fit product, meaning that you’re great for all kinds of trucks, SUVs, and RVs. You will need to check and see if your vehicle already has a set of roof cab lights. Otherwise, you need to drill a couple of holes so you can proceed with the wiring. This LED roof cab light set comes with 5 cab LED roof lights with 10 screws and 10 washers to complete your installation.

You can get these Truck Roof LED Cab Lights on Amazon for just 46.99 dollars a set.

Strumenti necessari

  • Drill
  • Screw Driver
  • Electrical Tape in 6 Assorted Colors
  • Ruler

Procedura

Passo 1

  • There are a couple ways you can power up this LED. You have the choice of adding a switch or just using the truck’s interior light switch. For demonstration purposes, we are using the truck’s interior lights to power up the entire assembly.
  • Expose the wires by removing the entire front map light assembly.

Passo 2

  • Get up to the roof of your truck to measure where you’re going to install these LED cab roof lights. You can use a dry erase marker to mark all the points where you will be drilling into the roof.

Passo 3

  • Get up to the roof of your truck to measure where you’re going to install these LED cab roof lights. You can use a dry erase marker to mark all the points where you will be drilling into the roof.

Passo 4

  • Use a screwdriver and attach the screws at the front and the rear of each LED roof lamp to permanently mount it.

Passo 5

  • Wire up the LED lights in parallel. Use some electrical tape to secure the connections. Route the wires through the front map light assembly to complete the wiring portion.

Passo 6

  • Test everything and enjoy your new LED cab roof light.

Fonte: iFixit – CC BY-NC-SA