Strumenti necessari

  • Orbital Buffer
  • Sanding Block

Procedura

Passo 1

  • Shoe polish can be used to visualize the scratches. Rub a small amount of dark shoe polish over the scratch.

Passo 2

  • Wipe the shoe polish over the panel. This fills the scratches with polish.

Passo 3

  • Block sand the panel with 2000-grit wet/dry sandpaper and plenty of water. Sand until the shoe polish disappears.

Passo 4

  • Polish out the sanding scratches with rubbing compound.

Passo 5

  • A polishing wheel makes short work of bringing the shine back. An oscillating polisher is less aggressive than this rotary polisher.
  • Don’t buff through the paint into the next layer, especially on high-crown or sharp edges.

Passo 6

  • Finish with light hand buffing to remove the last of the compound. Follow with car wax.

Fonte: iFixit – CC BY-NC-SA